We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

How to Choose Cube Storage Bins in 8 Steps

Learn how to choose cube storage bins that fit your shelf, from measuring the opening to picking material, handles and lids.

Cube storage bins look interchangeable, but a bin that is a fraction of an inch too big will jam in a shelf, and one that is too small leaves gaps and slides around. This guide shows how to choose cube storage bins in a few steps: measure the opening, decide what the bins will hold, pick the material and check the details that decide whether you will keep using them. It is general advice, so follow the shelf maker’s instructions, especially for wall anchoring, and ask a qualified handyperson if you are not sure how to secure a tall unit.

Once you know what to look for, browse all Cube Storage guides to compare shelves and bins.

Before You Start

You will need a tape measure, a pen and paper, and the shelf you plan to fill. If the shelf is not assembled yet, find the stated cube opening in the manual or the listing. Many listings in our guides give openings of about 11 inches, but sizes vary, and some shelves have openings closer to 8 or 13 inches.

Decide first what you want to store, because that choice drives the material, the handles and whether you want a lid.

Step 1: Measure the Opening

Measure the width, height and depth of one cube, inside edge to inside edge. Write all three down, and check a second cube, since openings can differ slightly from one to the next.

Subtract about half an inch from each dimension to find the largest bin that will slide in and out easily. A bin that matches the opening exactly is hard to pull out, especially once it is full.

Step 2: Decide What You Will Store

Soft items such as clothes, linens and plush toys suit fabric bins. Hard or messy items such as craft supplies, snacks and tools suit a plastic or rigid bin that wipes clean.

Heavy items such as books or tins are better kept in fewer, sturdier bins. A fabric bin with thin walls can sag when it is full, so match the bin to the load.

Step 3: Choose Open Bins or Lids

Open bins are faster to use and show what is inside. Lids keep out dust and hide clutter, but they add a little height, so leave room above the bin to lift the lid.

Many bins sold with lids are rectangular, not square, so check the listing size. A box that is longer than it is tall will not fit a standard cube opening.

Step 4: Pick the Material

Fabric folds flat and looks soft, which suits bedrooms and nurseries. Plastic wipes clean and suits laundry rooms, garages and kids’ rooms. Rigid fabric bins with board sides sit in between.

If you will store spare bins, a collapsible design saves space. If the bins will stay on the shelf, a rigid shape looks tidier.

Step 5: Check Handles and Walls

Handles make a full bin easier to pull out. Look for stitched or reinforced handles on fabric bins and cutout or molded handles on plastic ones. A label window or holder helps if many bins look alike.

Read the listing for stiffener boards in the walls and base. Weight limits, where they are given, are the seller’s figures, so keep loads moderate and avoid overfilling.

Step 6: Count How Many You Need

Count the cubes you plan to fill, then decide how many bins go in each. Leave a few cubes open for items you use daily, such as a book or a basket you reach for often.

Check the pack size before you order. Packs often come in sets of three, four, six or eight, and some listings state a different count in the title and the description.

Step 7: Buy One Set First

Buy a single set and try it in your shelf before you fill every cube. Check that the bins slide in, that handles are easy to grip and that lids lift off.

If the fit is good, order the rest in the same size and color so the shelf looks even. If it is too tight, return the set and choose a size down.

Step 8: Load the Shelf Safely

Put the heaviest bins on the bottom row and the lightest on top, so the shelf stays stable. Check that the shelf is anchored to the wall using the anti-tip kit it came with, or buy suitable anchors if none came with it.

Label each bin and keep a short list of what is in each row. A shelf that is easy to read stays tidy longer.

Common Mistakes

  • Buying bins before measuring the opening.
  • Choosing a rectangular lidded box for a square cube.
  • Overfilling bins, which strains the handles and walls.
  • Putting heavy bins on the top row of a tall shelf.
  • Skipping the wall anchor on a tall unit.
  • Ordering a full set before checking one for fit.

When to Get Help

Ask a qualified handyperson if you are unsure how to anchor a tall shelf into a wall, especially a plaster or masonry wall. Follow the manufacturer’s instructions, and do not rely on bins to hold a shelf steady.

Frequently Asked Questions

What size are standard cube storage bins?

Many listings in our guides give about 10.5 to 11 inches, but sizes vary by shelf. Measure your own opening before you buy.

Do storage cubes fit every cube shelf?

No. Shelves have openings from about 8 to 13 inches, and a bin must match the opening within a small margin. Check the listing and your shelf.

Should I choose fabric or plastic bins?

Fabric suits soft items and a softer look, while plastic wipes clean and suits damp or messy rooms. Choose by room and contents.

Can I mix bin sizes on one shelf?

You can, but rows look uneven and heavier bins can strain the frame. Keep the same size within a row when you can.

Where can I see specific bins?

See our best fabric storage cubes and best storage cubes with lids guides.

About the author

HomeTipsToday Editorial Team
HomeTipsToday Editorial Team

The HomeTipsToday Editorial Team researches home storage and organization products. We compare manufacturer specifications, listing information, and buyer ratings where they exist, and we do not run physical trials. Our method is described on the How We Review page, and affiliate commissions do not affect how products are ranked.