8 Best Bed Risers of 2026

Bed risers lift a frame a few inches to free up room underneath for storage bins, shoe boxes and luggage. This guide compares eight sets on lift height, stated load ratings, leg fit and stacking, using manufacturer listing information only.

Risers carry the weight of a bed and sleepers, so fit and rating matter more than price. Load figures below come from sellers and are given per set, per riser or in total, which the table notes. Once you have the lift you need, pair it with under bed storage bins, or browse more Bedroom Storage guides.

All Products Compared

Product	Best For	Lift Height	Pieces	Stated Load	Notable Feature
Kings Brand 6-Inch Bed Risers (Set of 4)	One simple tall lift	About 5.25 in	4	800 lb per set, as listed	Fits legs up to 3 in
CGK Unlimited 8-Piece Stackable Bed Risers	Choosing a height	3, 5 or 8 in by stacking	8 pieces	1,300 lb per set, as listed	Second set needed for center supports
ANNKUT 6-Inch Heavy Duty Bed Risers (6 Pack)	Six-legged frames	About 5.1 in	6	2,200 lb, as listed	Built-in rubber pads
Home It Adjustable Bed Risers (8-Piece Set)	Adjustable height	3, 5 or 8 in by stacking	8 pieces	1,300 lb total, as listed	Fits twin to Cal king per listing
Mezchi 6-Inch Bed Risers (6 Pack)	Large furniture legs	6 in	6	2,200 lb, as listed	Slot 2.7 in wide
EclatBain Adjustable Bed Risers (4 Pack)	Small lifts	3, 4.3 or 5.3 in by layers	4	4,000 lb with four, as listed	L-shaped half side
MONTIHOLD 4-Inch Bed Risers (Set of 4)	Modest lift	4 in	4	550 lb each, as listed	Rubber floor grips
ANNKUT 3-Inch Rectangle Bed Risers	Light, stackable lift	1.5 or 2.9 in	Not listed	Not listed	Fits legs up to 4.5 x 2.4 in

Top 3 Bed Risers Reviewed

#1 Kings Brand 6-Inch Bed Risers (Set of 4): Best for a Simple Tall Lift

Why We Picked It

Kings Brand is a plain set of four 6-inch plastic risers. The listing says each one adds 5.25 inches of lift, which is enough to slide most tall storage bins underneath, and describes a recessed 3 by 3 inch top that holds furniture legs up to 3 inches wide.

It also lists a wide base with a non-slip bottom that protects hardwood, tile and carpet, and says the risers are stackable for storage. The stated capacity is 800 pounds per set, which is a clearly worded figure compared with listings that do not say how a rating is split.

At about 2 pounds for the set, the plastic is light enough to move around the room, which makes placing four risers under a frame a one-person job for most beds.

Key Specifications

• Set: 4 risers
• Lift: about 5.25 in each
• Leg fit: up to 3 in wide
• Load: 800 lb per set, as listed
• Weight: about 2 lb for the set

Pros	Cons
Clearly stated set load Tall lift for large bins Wide non-slip base	One fixed height Legs wider than 3 in will not fit Set of four only covers four legs

Things to Consider

A set of four covers four legs only, so a bed with a center support or six legs needs more risers. Measure your leg width before ordering, since the cup is sized for legs up to 3 inches. The 800 pound figure is for the whole set, so check it against the combined weight of the bed, mattress and sleepers, and leave a comfortable margin rather than sizing to the limit.

Best For

Standard four-leg frames where you want one reliable, tall lift without adjusting anything.

Skip It If

Your frame has center support legs, round legs wider than 3 inches, or you want a smaller lift. For those frames, a larger set or an adjustable model is a better match.

Check current availability for the Kings Brand 6-Inch Bed Risers (Set of 4).

#2 CGK Unlimited 8-Piece Stackable Bed Risers: Best for Choosing Your Height

Why We Picked It

CGK Unlimited sells eight pieces: four 3-inch and four 5-inch risers. Used alone, or stacked, they give lifts of 3, 5 or 8 inches, so the same set can suit a modest bump or a tall clearance.

The listing describes a recessed cup that holds each leg, a textured non-slip base, and a rating of 1,300 pounds across the set, or roughly 325 pounds per corner. It warns that beds with a center support or six legs need a second set, which is a useful note most listings leave out.

The pieces are described as stackable with no tools or hardware, so adjusting the height later means lifting the bed and swapping the stack. That flexibility is the main reason to pick this set over a single-height riser.

Key Specifications

• Set: 4 small and 4 large risers
• Lift: 3, 5 or 8 in by stacking
• Load: 1,300 lb per set, as listed
• Base: textured non-slip
• Use: stackable, no tools

Pros	Cons
Three lift heights from one set Clear per-corner load note Warns about center supports	Stacking raises the center of gravity Second set needed for six legs Lower rating than some competitors

Things to Consider

Stacking to 8 inches gives the most storage room, but it also makes the bed taller and less stable, so check the bed frame guidance and keep the stack tidy. The per-corner rating assumes weight spread evenly, which a bed with a center support does not guarantee. Plan to buy more than one set for larger frames.

Best For

People who are not sure how much lift they need, or who want to change height later.

Skip It If

You want a single tall riser with a higher stated load, or you plan to stack to the maximum on a heavy frame. A single tall riser is more stable than a stack of smaller ones.

Check current availability for the CGK Unlimited 8-Piece Stackable Bed Risers.

#3 ANNKUT 6-Inch Heavy Duty Bed Risers (6 Pack): Best for Six-Legged Frames

Why We Picked It

ANNKUT sells its 6-inch riser in a six-pack, which covers a bed with six legs or a center support without buying a second set. The listing gives a trapezoid shape, a 0.8 inch groove depth and an actual lift of 5.1 inches.

It states a capacity of up to 2,200 pounds and describes a 1 inch internal skeleton, along with built-in rubber pads that stop sliding. The listing also warns that the risers only suit furniture with a leg size that fits the groove.

The listing also mentions use under desks, tables and sofas, so any spare risers can serve other furniture later, though bed use is the one that matters for storage.

Key Specifications

• Set: 6 risers
• Lift: about 5.1 in
• Groove depth: 0.8 in
• Load: up to 2,200 lb, as listed
• Pads: built-in rubber

Pros	Cons
Six pieces cover more legs High stated load rating Built-in rubber pads	Fixed height Groove size limits leg fit Rating basis not detailed

Things to Consider

The listing says the risers fit only certain leg shapes, so measure the width and depth of your legs against the groove. It also does not say whether the 2,200 pound rating is per riser or per set, so treat it as an upper bound and size to your bed weight with margin. Check the pads are seated under every riser before you set the bed down.

Best For

Frames with six legs or a center support, and buyers who want a high stated load.

Skip It If

Your furniture has wide or flat feet that will not sit in a groove, or you need a smaller lift. A thinner stackable set, such as the ANNKUT 3-inch option, is a better match for a modest bump.

Check current availability for the ANNKUT 6-Inch Heavy Duty Bed Risers (6 Pack).

How to Choose Bed Risers

Decide how much lift you need

Measure the height of the bins or boxes you want to store, then add an inch for sliding room. Lifts here run from 1.5 inches for the thin stackable ANNKUT up to 8 inches for stacked sets. More height means more storage, but also a taller bed that sits higher off the floor.

Check leg fit before anything else

Risers hold a leg in a cup or groove, so leg width and shape matter. Kings Brand fits legs up to 3 inches, Mezchi lists a 2.7 inch slot, and MONTIHOLD a 2.8 inch width. Measure every leg, including round and tapered ones, because a leg that rests on the rim can slip.

Read the load rating carefully

Some listings state a rating per riser, some per set, and some for the total. Compare this with the combined weight of the frame, mattress and everyone who sleeps on it, and leave a generous margin. If a listing does not explain how its rating is split, treat the number cautiously.

The other five options in brief

Home It is another 8-piece set with 3 and 5 inch risers rated 1,300 pounds in total. Mezchi sells six 6-inch risers rated 2,200 pounds with anti-slip stickers. EclatBain uses stackable layers for 3, 4.3 or 5.3 inch lifts, rated 4,000 pounds with four. MONTIHOLD offers 4-inch risers rated 550 pounds each. The thin ANNKUT 3-inch set lifts 1.5 or 2.9 inches and does not list a load rating.

Count the legs and supports

Look under the bed and count every point that touches the floor, including center beams, rails and extra legs on queen and king frames. Every one of them needs a riser of the same height, otherwise the frame can sag or tilt. Buy a set that covers the full count, or plan on a second set.

Stability and safety

Raising a bed changes how it sits. Use risers of the same height under every leg, keep stacks small, and avoid risers on bunk or loft beds unless the bed maker allows it. Check the frame regularly and stop using any riser that cracks. These are general precautions, and the bed manufacturer’s guidance comes first.

How We Evaluated These Bed Risers

We compared each product using the manufacturer listing: lift height, leg fit, number of pieces, stated load rating, stacking design and surface protection. We ranked on how clearly each listing supported its claims and how well the set suits a typical bedroom. Because load ratings are seller figures, we flag where the basis is unclear. We also left out products that are made for other furniture and only mention beds in passing, so each set here has a clear bed use. No product was ranked on ratings or reviews, because that data was not available to us. Some listings give inconsistent figures, which we note where they matter. Purchases through our links may earn a commission, which does not affect rankings. Prices change often, so check the current figure on the product page.

Frequently Asked Questions

How high should bed risers be?

Choose a lift slightly taller than the storage bins you plan to use, with a little room to slide them. Most listings here offer between 1.5 and 8 inches.

Are bed risers safe?

They can be when they fit the legs, carry the load and are used at the same height on every leg. Follow the bed maker’s guidance, avoid tall stacks and do not use risers on bunk or loft beds unless the manufacturer allows it.

Do bed risers work with a center support leg?

Only if you add risers for it. Most sets contain four pieces, so a bed with a center support or six legs needs six or more. One listing here warns about this directly, so count the legs before you order and buy the extra pieces at the same time.

Will bed risers scratch my floor?

Several listings mention rubber pads or non-slip bases that protect floors. Check for pads under every riser and wipe away grit that could scratch. Soft carpet can also compress under a loaded riser, so use a firm base if you notice tilt.

Can I stack bed risers?

Several listings are designed to stack for extra height. Stack only as far as the listing allows, and keep every leg the same height.

Final Verdict

For most beds, Kings Brand is the simplest choice, with a clearly stated set load and a tall lift. CGK Unlimited suits buyers who want to choose their height, and ANNKUT covers frames with six legs. Whichever you pick, measure your legs and match the lift to your storage bins before you order.

About the author